Freeside:1.7:Documentation:InstallingOnCentOS4

Installing Freeside 1.7.x on CentOS 4.4

This is a (hopefully) step-by-step guide for doing a basic installation of Freeside on CentOS 4.4 (4.5?) using RPMs whenever possible. It would probably be easier to use CPAN directly in some cases, but that wouldn't be very fun now would it? These instructions also include information for installing on Red Hat Enterprise Linux 4.4/4.5 using up2date instead of yum.

Software Installation

Run the correct command below depending on your architecture. The BASEARCH environment variable must be set before running many of the commands contained in this document. If you close your terminal and resume the process at a later time, you must re-run the export command. If you find that rpm or wget is unable to download a particular file, run echo $BASEARCH and make sure it outputs either i386 or x86_64.

Please stop updating this wiki replacing the occurances of $BASEARCH with i386 or x86_64.

# export BASEARCH=i386

...or...

# export BASEARCH=x86_64

Binary Packages

*Package*	*Repo*	*Version*
httpd	base	2.0.52-28.ent.centos4
postgresql-server	update	7.4.16-1.RHEL4.1
tetex	base	2.0.2-22.EL4.7
ghostscript	base	7.07-33
perl	centosplus	4:5.8.8-4.el4s1
gcc	base	3.4.6-8

# yum install httpd postgresql-server tetex ghostscript.$BASEARCH

Upgrade to perl 5.8.8 to get CGI >= 3.08.

# yum --enablerepo=centosplus upgrade perl

Next install the gcc complier

# yum install gcc

Perl Packages

Setup 3rd party repos for most of the extra perl modules.

# wget -O /tmp/rpmforge-release-0.3.6-1.el4.rf.$BASEARCH.rpm http://dag.wieers.com/rpm/packages/rpmforge-release/rpmforge-release-0.3.6-1.el4.rf.$BASEARCH.rpm
# rpm -ivh /tmp/rpmforge-release-0.3.6-1.el4.rf.$BASEARCH.rpm
# rpm --import http://dag.wieers.com/rpm/packages/RPM-GPG-KEY.dag.txt

# cat <<END>/etc/yum.repos.d/dries.repo
[dries]
name=Extra Fedora rpms dries - \$releasever - \$basearch
baseurl=http://ftp.belnet.be/packages/dries.ulyssis.org/redhat/el\$releasever/en/\$basearch/dries/RPMS
END
# rpm --import http://dries.ulyssis.org/rpm/RPM-GPG-KEY.dries.txt

Install the cpan2rpm tool so we can build RPMs from CPAN packages.

# rpm --import http://perl.arix.com/cpan2rpm/gpg.pub.asc
# yum install rpm-build perl-Module-Build
# rpm -ivh http://superb-east.dl.sourceforge.net/sourceforge/cpan2rpm/cpan2rpm-2.027-1.noarch.rpm

mod_perl2

Grab mod_perl 2.03 from the centosplus repo.

# yum --enablerepo=centosplus install mod_perl

Freeside Prereqs

*Perl Module*	*Package*	*Version*	*Repo*
libnet	libnet	1.1.2.1-2.rf	extras
libwww-perl	perl-libwww-perl.noarch	5.79-5	base
URI	perl-URI.noarch	1.30-4	base
HTML::Tagset	perl-HTML-Tagset.noarch	3.03-30	base
HTML::Parser	perl-HTML-Parser	3.35-6	base
DBI	perl-DBI	1.40-8	base
DBD::MySQL	perl-DBD-MySQL	2.9004-3.1	base
MailTools	perl-MailTools.noarch	1.74-1.c4	extras
TimeDate	perl-TimeDate.noarch	1.16-1.c4	extras
Date::Manip	perl-DateManip.noarch	5.42a-3	base
HTML::Mason	perl-HTML-Mason	1.3200-1.el4.rf	rpmforge
Text::Template	perl-Text-Template	1.44-1.2.el4.rf	dries
DateTime	perl-DateTime	0.2901-1.2.el4.rf	rpmforge
Chart	perl-Chart	2.4.1-1.el4.rf	dries
Cache::Cache	perl-Cache-Cache	1.05-1.el4.rf	dries
NetAddr::IP	perl-NetAddr-IP	4.004-1.el4.rf	rpmforge
String::Approx	perl-String-Approx	3.26-1.el4.rf	dries
Locale::SubCountry	perl-Locale-SubCountry	1.38-1.el4.rf	dries
Term::ReadKey	perl-Term-ReadKey	2.30-2.2.el4.rf	dries
DateTime::Format::Strptime	perl-DateTime-Format-Strptime	1.0700-1.2.el4.rf	dries
Net::Whois::Raw	perl-Net-Whois-Raw	1.20-1.el4.rf	dries
DBIx::DBSchema	perl-DBIx-DBSchema	0.31-1.el4.rf	dries
Tie::IxHash	perl-Tie-IxHash	1.21-1.2.el4.rf	dries
Crypt::PasswdMD5	perl-Crypt-PasswdMD5	1.3-1.2.el4.rf	dries
File::CounterFile	perl-File-CounterFile	1.04-1.2.el4.rf	dries
IPC::Run3	perl-IPC-Run3	0.036-1.el4.rf	dries
Net::SSH	perl-Net-SSH	0.08-1.2.el4.rf	dries
String::ShellQuote	perl-String-ShellQuote	1.03-2.2.el4.rf	dries
JSON	perl-JSON	1.07-1.el4.rf	dries
Data::Table	perl-Data-Table	1.50-1.el4.rf	dries
Lingua::EN::NameParse	perl-Lingua-EN-NameParse	1.22-2.2.el4.rf	dries
Lingua::EN::Inflect	perl-Lingua-EN-Inflect	1.89-1.2.el4.rf	dries
Apache::DBI	perl-Apache-DBI	0.9901-2.2.el4.rf	dries
IO::Scalar	perl-IO-stringy	2.110-1.2.el4.rf	dries
Text::CSV_XS	perl-Text-CSV_XS	0.23-1.2.el4.rf	dries
Spreadsheet::WriteExcel	perl-Spreadsheet-WriteExcel	2.17-1.el4.rf	dries
MIME-tools	perl-MIME-tools	5.420-1.el4.rf	dries
Date::Manip	perl-DateManip	5.42a-3	base
Crypt::DES	perl-Crypt-DES	2.05-3.2.el4.rf	dries
Crypt::Blowfish	perl-Crypt-Blowfish	2.10-1.2.el4.rf	dries
Digest::MD4	perl-Digest-MD4	1.5-1.2.el4.rf	dries
Crypt::Rijndael	perl-Crypt-Rijndael	0.05-1.2.el4.rf	dries
ExtUtils::CBuilder	perl-ExtUtils-CBuilder	0.18-1.el4.rf	dries
DBD::Pg	perl-DBD-Pg	1.49-1.el4s1	centosplus
Locale-Codes		cpan2rpm
Frontier::RPC2		cpan2rpm
Business::CreditCard		cpan2rpm
Time::Duration		cpan2rpm
HTML::Widgets::SelectLayers		cpan2rpm
Color::Scheme		cpan2rpm
Params::Classify		cpan2rpm
Scalar::Number		cpan2rpm
Data::Integer		cpan2rpm
Data::Float		cpan2rpm
Module::Runtime		cpan2rpm
Authen::DecHpwd		cpan2rpm
Authen::Passphrase		cpan2rpm
Data::Entropy::Algorithms		cpan2rpm
Crypt::MySQL		cpan2rpm
Crypt::Eksblowfish		cpan2rpm
Crypt::UnixCrypt_XS		cpan2rpm
Fax::Hylafax::Client		cpan2rpm

# yum -y install libnet perl-libwww-perl perl-URI perl-HTML-Tagset
# yum -y install perl-HTML-Parser 
# yum -y install perl-MailTools perl-TimeDate
# yum -y install perl-HTML-Mason perl-Text-Template perl-DateTime perl-Chart
# yum -y install perl-Cache-Cache perl-NetAddr-IP perl-String-Approx
# yum -y install perl-Locale-SubCountry perl-Term-ReadKey
# yum -y install perl-DateTime-Format-Strptime perl-Net-Whois-Raw
# yum -y install perl-Tie-IxHash perl-Crypt-PasswdMD5
# yum -y install perl-File-CounterFile perl-IPC-Run3 perl-Net-SSH
# yum -y install perl-String-ShellQuote perl-JSON perl-Data-Table
# yum -y install perl-Lingua-EN-NameParse perl-Lingua-EN-Inflect
# yum -y install perl-IO-stringy perl-Text-CSV_XS perl-Spreadsheet-WriteExcel
# yum -y install perl-MIME-tools perl-DateManip
# yum -y install perl-DBI perl-DBD-MySQL perl-Apache-DBI 
# yum -y install --enablerepo=centosplus perl-DBD-Pg
# yum -y install perl-Crypt-DES perl-Crypt-Blowfish perl-Digest-MD4
# yum -y install perl-Crypt-Rijndael perl-ExtUtils-CBuilder

You can install these using cpan, or follow the directions here using cpan2rpm.

• DBIx::DBSchema

# yum -y install perl-DBIx-DBSchema

• Frontier::RPC2

# yum -y install perl-XML-Parser
# cpan2rpm --author='Ken MacLeod <ken@bitsko.slc.ut.us>' --version='0.07b4' Frontier-RPC
# rpm -ivh /usr/src/redhat/RPMS/noarch/perl-Frontier-RPC-0.07b4-1.noarch.rpm

• Business::CreditCard

# cpan2rpm Business::CreditCard
# rpm -ivh /usr/src/redhat/RPMS/noarch/perl-Business-CreditCard-0.30-1.noarch.rpm

• Time::Duration

# yum -y install perl-Test-Pod perl-Test-Pod-Coverage
# cpan2rpm Time::Duration
# rpm -ivh /usr/src/redhat/RPMS/noarch/perl-Time-Duration-1.04-1.noarch.rpm

• HTML::Widgets::SelectLayers

# cpan2rpm http://search.cpan.org/CPAN/authors/id/I/IV/IVAN/HTML-Widgets-SelectLayers-0.07.tar.gz
# rpm -ivh /usr/src/redhat/RPMS/noarch/perl-HTML-Widgets-SelectLayers-0.07-1.noarch.rpm

• Color::Scheme

Ran into much brokenness when trying to build Test-Simple-0.67. Just skip the dep checks and test phase and hope. I mean, come on, it's Color::Scheme for crying out loud!

# yum -y install perl-Test-Differences
# cpan2rpm --make-no-test --no-depchk Color::Scheme
# rpm -ivh /usr/src/redhat/RPMS/noarch/perl-Color-Scheme-1.02-1.noarch.rpm

• Params::Classify

Install some deps first...

• • Scalar::Number

• • • Data::Integer

# cpan2rpm Data::Integer
# rpm -ivh /usr/src/redhat/RPMS/noarch/perl-Data-Integer-0.001-1.noarch.rpm

• • • Data::Float

# cpan2rpm Data::Float
# rpm -ivh /usr/src/redhat/RPMS/noarch/perl-Data-Float-0.005-1.noarch.rpm

# cpan2rpm Scalar::Number
# rpm -ivh /usr/src/redhat/RPMS/noarch/perl-Scalar-Number-0.001-1.noarch.rpm

# cpan2rpm Params::Classify
# rpm -ivh /usr/src/redhat/RPMS/noarch/perl-Params-Classify-0.002-1.noarch.rpm

• Module::Runtime

# cpan2rpm Module::Runtime
# rpm -ivh /usr/src/redhat/RPMS/noarch/perl-Module-Runtime-0.003-1.noarch.rpm

• Authen::DecHpwd

# cpan2rpm Authen::DecHpwd
# rpm -ivh /usr/src/redhat/RPMS/${BASEARCH}/perl-Authen-DecHpwd-2.001-1.${BASEARCH}.rpm

• Data::Entropy::Algorithms

# cpan2rpm --make-no-test Data::Entropy
# rpm -ivh /usr/src/redhat/RPMS/noarch/perl-Data-Entropy-0.003-1.noarch.rpm

• Crypt::MySQL

# cpan2rpm --version='0.04' --author='IKEBE Tomohiro <ikebe@shebang.jp>' Crypt::MySQL
# rpm -ivh /usr/src/redhat/RPMS/${BASEARCH}/perl-Crypt-MySQL-0.04-1.${BASEARCH}.rpm

• Crypt::Eksblowfish

# cpan2rpm Crypt::Eksblowfish
# rpm -ivh /usr/src/redhat/RPMS/${BASEARCH}/perl-Crypt-Eksblowfish-0.001-1.${BASEARCH}.rpm

• Crypt::UnixCrypt_XS

# cpan2rpm Crypt::UnixCrypt_XS
# rpm -ivh /usr/src/redhat/RPMS/${BASEARCH}/perl-Crypt-UnixCrypt_XS-0.06-1.${BASEARCH}.rpm

• Authen::Passphrase

# cpan2rpm Authen::Passphrase
# rpm -ivh /usr/src/redhat/RPMS/noarch/perl-Authen-Passphrase-0.005-1.noarch.rpm

• Fax::Hylafax::Client (Optional)

Skip the tests here as well, unless you happen to have a properly configured HylaFAX server handy. Or, skip the package entirely if you don't plan on sending FAX invoices.

# cpan2rpm --make-no-test Fax::Hylafax::Client
# rpm -ivh /usr/src/redhat/RPMS/noarch/perl-Fax-Hylafax-Client-1.02-1.noarch.rpm

RT Prereqs

*Perl Module*	*Package*	*Version*	*Repo*
Apache::Session	perl-Apache-Session	1.81-1.el4.rf	dries
HTML-Format	perl-HTML-Format	2.04-1.2.el4.rf	dries
Class::ReturnValue	perl-Class-ReturnValue	0.53-1.2.el4.rf	dries
DBIx::SearchBuilder	perl-DBIx-SearchBuilder	1.43-1.el4.rf	rpmforge
Log::Dispatch	perl-Log-Dispatch	2.11-1.2.el4.rf	rpmforge
Locale::Maketext::Lexicon	perl-Locale-Maketext-Lexicon	0.62-1.el4.rf	dries
Locale::Maketext::Fuzzy	perl-Locale-Maketext-Fuzzy	0.02-1.2.el4.rf	dries
Text::Wrapper	perl-Text-Wrapper	1.000-1.2.el4.rf	dries
Time-modules	perl-Time-modules	2003.1126-1.2.el4.rf	dries
Text::Autoformat	perl-Text-Autoformat	1.13-1.2.el4.rf	dries
Text::Quoted	perl-Text-Quoted	1.8-1.2.el4.rf	dries
Regexp::Common	perl-Regexp-Common	2.120-1.2.el4.rf	dries
HTML::Scrubber	perl-HTML-Scrubber	0.08-1.2.el4.rf	dries
Tree::Simple	perl-Tree-Simple	1.17-1.el4.rf	dries
HTML::TreeBuilder	perl-HTML-Tree	3.23-1.el4.rf	dries

# yum -y install perl-Apache-Session perl-HTML-Format perl-Class-ReturnValue
# yum -y install perl-Locale-Maketext-Lexicon perl-Locale-Maketext-Fuzzy
# yum -y install perl-Text-Wrapper perl-Time-modules
# yum -y install perl-Text-Autoformat perl-Text-Quoted perl-Regexp-Common
# yum -y install perl-HTML-Scrubber perl-Tree-Simple perl-HTML-Tree

• Log::Dispatch

Use the SRPM from Fedora Core 5. They have the correct and properly patched version that supports mod_perl 2.

But first, a couple of prereqs.

# yum -y install perl-File-Find-Rule perl-IO-String
# yum -y install perl-MIME-Lite perl-Mail-Sender perl-Mail-Sendmail

Now build and install Log::Dispatch itself. (There seems to be another rpm too, but it need Apache::Log)

# wget -O /usr/src/redhat/SRPMS/perl-Log-Dispatch-2.15-2.fc5.src.rpm http://download.fedora.redhat.com/pub/fedora/linux/extras/5/SRPMS/perl-Log-Dispatch-2.15-2.fc5.src.rpm

# rpmbuild --rebuild /usr/src/redhat/SRPMS/perl-Log-Dispatch-2.15-2.fc5.src.rpm
# rpm -ivh /usr/src/redhat/RPMS/noarch/perl-Log-Dispatch-2.15-2.noarch.rpm

• DBIx::SearchBuilder

DBIx::searchBuilder is a little painful to install because it requires DBD::Oracle. You can just run "yum install perl-DBIx-SearchBuilder" if you want to go through the trouble of building and installing DBD::Oracle first. Again, that can be rather painful and isn't within the scope of this guide.

The alternative below is to force install the RPM for DBIx::SearchBuilder since we're not going to use Oracle anyway. You have to exclude it from future updates in yum otherwise you'll get dep failures everytime you do a "yum upgrade".

If you're not going to use RT, just skip DBIx::SearchBuilder altogether.

# yum -y install perl-Want perl-Clone perl-Cache-Simple-TimedExpiry
# yum -y install perl-DBD-SQLite perl-capitalization perl-Class-Accessor

# rpm -ivh --nodeps http://apt.sw.be/redhat/el4/en/${BASEARCH}/dag/RPMS/perl-DBIx-SearchBuilder-1.43-1.el4.rf.noarch.rpm

# echo "exclude=perl-DBIx-SearchBuilder" >> /etc/yum.conf

System configuration

This is just following the directions with CentOS-specific commands.

# groupadd freeside
# useradd -g freeside freeside

With CentOS 4.4, postgresql wouldn't start if SELinux was enabled. We call "setenforce 0" here to temporarily disable it. Some claim that it only needs to be disabled the first time postgresql is started.

Enable postgresql at startup, disable selinux temporarily, and start postgresql.

# chkconfig postgresql on
# setenfore 0
# service postgresql start

Create the freeside datbase user for postgresql.

# su -c "createuser -P freeside" - postgres

Installing Freeside

su to the freeside user, extract a copy of the freeside tarball or check out the code from CVS into the freeside user's home directory. You should have the freeside top-level Makefile in /home/freeside/freeside/Makefile or /home/freeside/freeside-1.7.0/Makefile at this point. 1.7.0 wasn't officially released at the time of writing, so we're using a version checked-out from CVS.

Edit freeside's top-level Makefile with your configuration. Here are some examples...

FREESIDE_CONF = /etc/freeside
FREESIDE_LOG = /var/log/freeside
FREESIDE_LOCK = /var/lib/freeside
FREESIDE_CACHE = /var/lib/freeside
FREESIDE_EXPORT = /var/lib/freeside

APACHE_VERSION = 2
FREESIDE_DOCUMENT_ROOT = /var/www/freeside/html

INIT_FILE = /etc/init.d/freeside
INIT_INSTALL = /sbin/chkconfig freeside on

HTTPD_RESTART = /etc/init.d/httpd restart
APACHE_CONF = /etc/httpd-freeside/conf.d

As the freeside user, create the database and make the perl modules.

$ createdb -E sql_ascii freeside

$ make perl-modules

As root, install the perl modules and create the initial config.

# make install-perl-modules

# mkdir -m 770 /var/lib/freeside
# chown -R freeside:root /var/lib/freeside/
# make create-config

Apache Configuration

Creating Freeside's Apache Instance

The default Apache init script for CentOS doesn't make it very easy to setup multiple instances of Apache. A few small modifications take care of that problem.

Start by making a copy of the init script, as well as download the patch and apply it to your httpd-freeside init script. You can make a symlink if you'd like to eventually setup additional Apache instances.

# ln -s /etc/init.d/httpd /etc/init.d/httpd-freeside

# cd /etc/init.d/
# wget -O /tmp/httpd-freeside.patch http://users.fire2wire.com/~khoff/freeside/1.7.0/httpd-freeside.patch
# patch < /tmp/httpd-freeside.patch

Make a copy of the Apache server root.

# cp -av /etc/httpd /etc/httpd-freeside

You can remove any extra conf files from /etc/httpd-freeside/conf.d (webdav, php, etc.) if you're not using them. They'll only take up more memory and potentially make freeside slower.

/etc/httpd-freeside/conf/httpd.conf

Change the following Apache configuration directives in /etc/httpd-freeside/conf/httpd.conf to match our previous changes.

• ServerRoot "/etc/httpd-freeside"
• PidFile run/httpd-freeside.pid

We're changing the listening port in case you're using the default Apache configuration (and port) for something else. This can be remedied by binding to a specific IP address as well (eg. 192.168.0.2:80).

• Listen 8080

Freeside's instance of Apache needs to run as the freeside user and group.

• User freeside
• Group freeside

• DocumentRoot "/var/www/freeside/html"

• <Directory "/var/www/freeside/html">

• ErrorLog logs/freeside_error_log
• CustomLog logs/freeside_access_log combined

Install Docs and Freeside's Apache Includes

Inside the freeside source directory, run "make install-docs" and "make install-apache" as root.

# make install-docs
# make install-apache

Edit the config file that was just created (/etc/httpd-freeside/conf.d/freeside-base2.conf) by "make install-apache" and change the AuthUserFile directive to match our new path.

• AuthUserFile /etc/freeside/htpasswd

Populating the Database

Populate the freeside database with the initial data, as the freeside user.

$ freeside-setup -d example.com

Create the freeside system users, as the freeside user.

$ freeside-adduser -g 1 fs_queue
$ freeside-adduser -g 1 fs_daily
$ freeside-adduser -g 1 fs_selfservice

Create whatever other freeside users you want, again, as the freeside user.

freeside-adduser -g 1 username
htpasswd /etc/freeside/htpasswd username

Repeat the last two commands as many times as you want for your internal staff's freeside accounts.

Startup Configuration

We just need to make sure that our new instance of Apache and the freeside queue daemon start when we boot.

# make install-init

# chkconfig freeside on
# chkconfig httpd-freeside on

And last but not least...start freeside's Apache instance.

# service httpd-freeside start

Hopefully, Apache should start without errors. If you do get errors, check /var/log/httpd/freeside_error_log.

Assuming Apache started correctly, you should now be able to access freeside via http://<Your server's FQDN or IP>:8080/. You can login using the username and password you set earlier with htpasswd.

From here, consult the standard freeside install documentation in the wiki on how to proceed with initial configuration. Good luck!

Problems

There might be some formatting issues as this was converted from TWiki to MediaWiki markup. If the syntax of a command doesn't look correct or doesn't make sense, it probably didn't get escaped correctly, or your web browser gobbled up some angle brackets, or both!